![]() There’s a lot of info, and the process to slice a file for SLA is quite different than slicing for a standard FDM. Do I need to add any special start gcode, will the peopoly firmware simply ignore or disregard any commands for heating or what have you? I just want to make sure I’m not missing anything, or have done something wrong so far. I have the ‘extruder’ set to 1, and I’ve just left the printhead values where they’re at. In the machines firmware I also adjusted the x value from 360 to 130 and the y value from 360 to 130. I’ve got my build area set as a rectangle, 130x, 130y and 180z. So I just want to reconfirm that I’m not messing anything up here. I do not want to use one of my FDM machines with the Moai profile. So within cura, it has the nozzle diameter listed, with printing and heated bed temps. Obviously, these don’t have nozzles, heating elements or heated beds, it’s just a resin. My only question at this point is the machine. I have the cura profile imported (Using 50um). Now I’m following the workflow using the guide, I’ve got my model positioned with the holes in it, supports generated, and everything rotated satisfactory. So far, I’ve followed most guides, I ran a test print using the gcode file on the SD and everything seems good (Prints came out great). I have a fair amount of FDM printing experience under my belt (About 6-ish) months or so, but I guess slicing is one of my weak points. Once you're empty, then go to "Set up new machine" and complete the machine set up using the correct Machine Settings above.Hey guys, new to SLA printing here. This means you have cleared all previous machine profiles. Repeat this process until you no longer have the option to click "edit your machine". Select the profile from the drop-down > Edit > uninstall: If you have multiple machines in the drop-down, you will want to uninstall all of them so we can start fresh. That way you can differentiate different feeds and speeds for different machines.įirst go to, click on any project. Your saved cut settings will now be tied to specific machine profiles along with bit/material. Adding multiple profiles is only available to Easel Pro With Multiple Machine Profiles, your machine's settings are stored in Inventables’ servers and retrieved as needed.įree users have access to one machine profile and can uninstall it to use a different machine. Note: If your machine is not carving the correct size, you may have chosen the wrong Machine Settings.įor those of us with more than one CNC and / or computer, setting up CNCs can eat a lot of time. ![]() In particular, you can configure Monitor to save APFS Snapshots, monitor the free space on your hard drives, and to monitor the SMART routines of your hard drives. ![]() Please only select if you purchased November 2021 and later, or if you have done all the upgrades (including the Makita). Techtool Pro includes the option to install Techtool Monitor, which operates in the background to monitor several of your Macs critical functions. NOTE: This machine includes the Makita router and T-Slot Wasteboard. ![]() Note: If your machine is not carving the correct size, you may have chosen the wrong Machine Settings. Check your receipts to see which components you purchased. NOTE: If you purchased the 2021 Upgrades Z-Axis and/or the 9 mm Belt and Motor Kit, your options will be different. Note: Once you have chosen the correct machine and completed the Machine setup, you can check the Firmware Settings here Walkthrough Tutorial: Firmware Settings Checkīefore November 2021, the stock X-Carve did not include any upgrades. If you have only the belt/motor or only the Z-axis upgrade, then you will want to choose X-Carve before November 2021*, click here and select the correct hardware under 'Enter your machine details'. *if you have the pre-November 2021 machine with the 2021 full upgrade kit with belt/motor AND Z-axis upgrades kits then you need the November 2021 Upgraded Firmware settings and can choose X-Carve after November 2021, click here. If you have multiple multiple machines, click here. If you purchased an X-Carve after November 2021, click here. If you purchased an X-Carve before November 2021*, click here. Once in a project, go to Machine > 'Set up new machine' and complete the machine set up using the correct Machine Profile Set Up below. Once you're empty, go to, click on any existing project or 'new project'. To clear out any extra machine profiles, click here. If you have only one machine, we recommend having only one profile set up. If you are unsure, check your receipt for your purchase date ( My Account > Order History). Machine Settings will vary depending on when you purchased your machine and which components you have. Master Enterprises - Offering Master Green Fusing Machine Profile Belts at Rs 2500/unit in Bengaluru, Karnataka. First, you need to determine the correct machine.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |